|
Futronic FS81 USB2.0 Fingerprint Scanner module
Futronic's FS81 USB2.0 Fingerprint Scanner module uses advanced CMOS sensor technology and precise optical system to deliver high quality fingerprint image. It can capture a raw fingerprint image via USB2.0 into host system in 100ms. So it is good for any fingerprint recognition application.
Its finger scanning window is a crown glass with a thickness of 14mm. So it is much more reliable and robust compared to any semiconductor type fingerprint sensor.
The finger is illuminated by 4 infra-red LEDs during scanning and the light intensity is automatically adjusted according to scanning fingerprint's characteristics (wet, dry, blurred, etc) to optimize the quality of the captured fingerprint image.
FS81 has a 5 pins JST connector for connecting to USB host. Futronic provides USB drivers and API for capturing raw fingerprint image on MS Windows, Linux and Windows CE. So it is an ideal solution for adding fingerprint recognition to standalone devices.
Futronic provides USB drivers and API for FS81 to capture a raw fingerprint image on the following platforms:
Windows 2000/XP
Vista 32bit and 64 bit
Linux with kernel 2.4 or after (for both x86 and ARM9)
Windows CE 5.0 and 6.0 (for both x86 and ARM9)
Specification
Fingerprint scanning window size is 16x24mm
Image resolution is 480x320 pixel, 500 DPI
Raw fingerprint image file size is 150K byte
With 5 pin JST connector for USB connection
USB 2.0 compatible interface, plug and play device
WHQL approved for Vista 32bit and 64bit
Small size, 45 x 55 x 20 mm
Light weight, 80 gram
Operation temperature: -10 to +55 Degree Celsius
Electrical characteristics
Light source: Infrared LED
Supply voltage: DC 4.5-5.5V via USB port
Power consumption:
-- active <500mW(during scanning)
-- standby <200mW(when scanner is connected PC but no scanning)
-- sleep mode <5mW(activated by standard USB bus event only)
ESD contact - 8KV Air discharge - 16KV no permanent damage
|
|
DOWNLOAD
brochure |
|
|
