|
Futronic's FS80 USB2.0 Fingerprint Scanner
Futronic's FS80 USB2.0 Fingerprint Scanner uses advanced CMOS sensor technology and precise optical system to deliver high quality fingerprint image. It can capture an Un-distorted raw fingerprint image into PC in 100ms and is good for any fingerprint recognition application.
The finger scanning window is a crown glass with a thickness of 14mm. It is much more reliable and robust compared to any semiconductor type fingerprint sensor.
The finger is illuminated by 4 infra-red LEDs during scanning and the light intensity is automatically adjusted according to scanning fingerprint's characteristics (wet, dry, blurred, etc) to optimized the quality of the captured fingerprint image.
Special electronic circuit is built into FS80 to do Live Finger Detection(LFD). With appropriate software in PC, user can select this LFD feature so that only live finger's fingerprint will be scanned into PC. Fake fingers made from silicone rubber, play-doh, etc. will be rejected. And the LFD feature is included in all Futronic's standard software.
Specification
Fingerprint scanning window size is 16x24mm
Image resolution is 480x320 pixel, 500 DPI
Raw fingerprint image file size is 150K byte
With Live Finger Detection (LFD) feature
USB 2.0 compatible interface, plug and play device
With a 2M standard USB cable
Small size, 45 x 63 x 26 mm
Light weight, 120 gram
Operation temperature: -10 to +55 Degree Celsius
Electrical characteristics
Light source: Infrared LED
Supply voltage: DC 4.5-5.5V via USB port
Power consumption:
-- active <500mW(during scanning)
-- standby <200mW(when scanner is connected PC but no scanning)
-- sleep mode <5mW(activated by standard USB bus event only)
ESD contact - 8KV Air discharge - 16KV no permanent damage
|
|
DOWNLOAD
brochure |
|
|
